- Full-featured CAD program for 2-D
drawing design
- Supports AutoCAD DWG/DXF drawing
formats
- Powerful entity change feature for
quick editing
- Provides continuous filleting feature
- Provides boundary trim/break features
- Provides profile trimming feature
- Provides automatic polyline joining
feature
- Generates polyline offset paths
automatically
- Function to show path direction
- Allows unlimited undo’s and redo’s
- Provides Bezier and Cubic Splines
- Provides multi-language support
- Set cut-in point at either mid-point
or end-point
- Function to divide arc paths into
segments
- Automatic oil hole generation for
circular die cutting
- Paths are easily identified by setting
different colors
- Automatic cutting sequencing based on
shortest travel path
- Easy modification on path cutting
sequence
- Quick inversion from die paths to
punch paths or vice versa
- With Job Control Data (JCD) feature,
all cutting condition settings can be saved with drawing file
- Provides Post Control File for various
machine brands
- Easy modification on global or local
cutting conditions
- Provides Group setting feature for
same type of cutting paths
- Automatic showing cutting conditions
beside each path drawing
- Pre-stop length set in fixed value or
in proportion of perimeter
- Pre-stop length can be set across the
last entity segment
- Cutting and trimming paths
differentiated by colors
- Automatic generation of compensated
path
- Automatic path generation with overcut
setting
- Automatic inner/outer fillet radius
settings
- Circular undercut can be fine-tuned
with shifted arc center
- Provides multiple cuts with
forward/reverse trimmings
- Provides taper cutting for cylindrical
workpieces
- Supports partial taper cutting
- Provides precision control for
multi-hole cutting
- Automatic wire cut-off and
re-threading process
- Automatic NC generation for rough cut,
cut-through and trimming cut
- Automatic change on compensation and
machining conditions for multi-cuts
- Three cutting methods available for
punch and die machining
|
- Consistent process setting procedure
with 2-D paths
- Supports pre-stop setting, auto
fillet/undercut and overcut features
- Provides multiple trimming and
forward/reverse trimming
- Supports 3-D open path processing
- Supports auto-threading process for
various cut types
- Supports arc-type movement for wire
approaching/leaving
- 4-axis surface finish by segment
control (chordal deviation)
- Set arc movement for top and bottom
paths respectively (G02/G03)
- Provides dynamic viewing of 3-D
workpiece
- Automatic detection of maximum
taper/UV travel with preview
- Taper settings saved with drawing file
- Direct partial taper setting
- Provides 3-D view checking for
excessive taper setting
- Supports irregular-shaped holes
- Requires only single start point
- Supports no-core cutting with partial
tapers
- Supports no-core cutting for 3-D holes
- Shop automation made possible when
combined with auto-threading machines
- Precision involute gear design module
- Provides shifted coefficient and
backlash setting features
- Provides overpin and overteeth
measuring methods
- Provides undercut and interference
checking
- Previews matching details before
generating the gear
- Provides up to 256 job groups
- Provides up to 16 trimming settings
for each group
- Provides cutting database for selected
machine models
- Supports multiple NC file opening and
editing (MDI)
- Supports multiple sessions of DNC
transmission
- Supports various brands of NC
controller
- Supports drip feed mode
|
IBM PC or compatible PC (Pentium
and up)
Windows 95/98/NT/2000/Me/XP
64MB main memory
200MB disk space
Color display
CD-ROM drive (for installation
only)
|
|
